PROFESSIONAL - COMMERCIAL/RESIDENTIAL
Lacquering
Oiling
Looking for oils for your floor?
Maintenance
Fillers
PreFill
A water-based acrylic filler base for filling gaps. Mixed with sanding dust from the sanded floor. It is used for filling small gaps in floors. PreFill is quick drying and is to be used in combination with Junckers water-based priming and floor-finishing products. PreFill is the ultimate water-based solution for floors made of wood species sensitive to changes in humidity.
APPEARANCE
Creamy/milky. When mixed with sanding dust it dries to the same colour as the wood.
COVERAGE
5-20 m²/litre depending on the condition of the floor.
PACKAGE SIZE
5 litres.
DRYING TIME AT 20°C AND 50% RH
45-90 minutes
APPLICATION
Broad full-edged spatula stainless steel.
BaseFill
A quick-drying solvent-based filler for filling larger gaps. Mixed with sanding dust from the sanded floor. It is used for filling gaps up to 2mm wide. BaseFill is used in combination with Junckers solvent-based or water-based lacquers, and is suitable for most sanded and untreated parquet floors, including most exotic wood floors.
APPEARANCE
Colourless. When mixed with sanding dust it dries to the same colour as the wood.
COVERAGE
10 m²/litre
PACKAGE SIZE
5 and 10 litres.
DRYING TIME AT 20°C AND 50% RH
Approx. 15 minutes.
APPLICATION
Broad full-edged spatula stainless steel.
Priming lacquers
PreLak
One-component water-based primer. Minimises side-bonding for all wooden floors. PreLak dries quickly and is easy to sand. Prelak can be used with Junckers 1-pack and 2-pack water based finishes.
APPEARANCE
PreLak Clear: Creamy/milky. Dries up to a clear finish.
PreLak White: Creamy/milky. Dries up to a transparent white finish.
COVERAGE
PreLak Clear : 8 m²/litre.
PreLak White: 10 m²/litre.
PACKAGE SIZE
PreLak Clear: 5 and 10 litres.
PreLak White: 5 Litres
DRYING TIME AT 20°C AND 50% RH
PreLak Clear: Approx. 1-2 hours.
PreLak White: Approx. 4 hours.
APPLICATION
Short hair roller.
BasePrime
An oil-based very fast curing primer. For wooden floors where water-based primers cannot be use due to poor adhesion, for example exotic and oily timbers. BasePrime gives the floor more depth of colour and should only be used directly on to bare wood.
APPEARANCE
Clear finish.
COVERAGE
10 m²/litre.
PACKAGE SIZE
5 and 10 litres.
DRYING TIME AT 20°C AND 50% RH
Approx. 30 minutes
APPLICATION
Brush or short-pile varnishing roller.
Lacquers
Strong Premium
One-component water-based 100% polyurethane lacquer. Low odour and the toughest onecomponent lacquer on the market. Non yellowing and excellent clarity even on dark coloured floors. Suitable for previously sealed as well as on new or fully sanded floors.
APPEARANCE
Creamy/milky in the container. Colourless film when dry
GLOSS LEVEL
(10) Ultra Matt
(20) Matt
(50) Silk Matt
COVERAGE
10-12 m²/litre.
PACKAGE SIZE
5 litres.
DRYING TIME AT 20°C AND 50% RH
3 hours.
Fully cured after 72 hours.
Important! Apply maximum 2 coats per day.
APPLICATION
Brush, roller, air/airless spray. Don’t apply by pouring out the lacquer directly on the floor.
ProFinish
One-component water-based co polymer acrylic/polyurethane lacquer. Fast drying and curing lacquer for normal everyday residential use. Non yellowing and excellent clarity even on dark coloured floors. Suitable for previously sealed as well as on new or fully sanded floors.
APPEARANCE
Creamy/milky in container. Colourless film when dry.
GLOSS LEVEL
10) Ultra Matt
(20) Matt
(50) Silk Matt
(80) Gloss
COVERAGE
10-12 m²/litre.
PACKAGE SIZE
5 litres.
DRYING TIME AT 20°C AND 50% RH
4 hours.
Fully cured after 72 hours.
Important! Apply maximum 2 coats per day.
APPLICATION
Brush, short haired mohair roller, air/airless spray
ProTech
One-component oil based lacquer for professional use. Provides a tough and hard wearing finish for machine sanded or untreated wooden floors. Compared to other oil based products ProTech is easy and pleasant to use due to its low odour. Highlights the warmer and richer colours in the wood, similar to Oil, but with the benefits of a lacquer finish.
APPEARANCE
Colourless film when dry
GLOSS LEVEL
(20) Matt
(50) Silk Matt
COVERAGE
8-10 m²/litre.
PACKAGE SIZE
2½, 5, and 10 litres.
DRYING TIME AT 20°C AND 50% RH
Approx. 6-8 hours.
Light traffic: 24 hours.
Maximum hardness achieved after one week.
APPLICATION
Brush, mohair roller, air/airless spray.
Professional 625
Two-component acid curing lacquer with very high chemical resistance. For professional use on wooden floors in high traffic commercial, and residential areas. Can be used on untreated wooden or previously sanded floors to obtain a deep colour lacquered finish.
APPEARANCE
Colourless film when dry.
GLOSS LEVEL
(20) Matt
(50) Silk Matt
COVERAGE
10 m²/ litre
PACKAGE SIZE
5.2 (5 + 0.2) litres
DRYING TIME AT 20°C AND 50% RH
Recoating: 1½ hours.
Light traffic: 24 hours.
Fully cured after 3 days,
APPLICATION
Brush, mohair roller, air/airless spray.
HP Commercial
Premium quality two-component water-based 100% polyurethane lacquer. For use in very high traffic areas and is exceptionally durable and scuff resistant. Non-yellowing, very fast curing and ready for use the following day. Must be mixed with HP Commercial Hardener before use.
APPEARANCE
Creamy/milky in container. Colourless film when dry.
GLOSS LEVEL
(10) Ultra Matt
(20) Matt
(50) Silk Matt
COVERAGE
10-12 m²/litre.
PACKAGE SIZE
4.95 litres.
(4½ litres and 0.45 litres
DRYING TIME AT 20°C AND 50% RH
Touch dry/recoating:
Approx. 3 hours.
Ready for light traffic: 8 hours.
Fully cured after 3 days.
APPLICATION
Brush, short haired mohair roller, air/airless spray.
HP Friction+
A slip resistant twocomponent non yellowing water based 100% polyurethane lacquer, based upon our HP Commercial lacquer. Fast curing and ideal for use in high traffic areas where slip resistance is important, eg. restaurants and bars. Must be used as the final coat only. Must be mixed with Junckers HP Friction+ Hardener before use. Tested to BS7976-2:2002.
APPEARANCE
Creamy/milky in container. Colourless film when dry.
GLOSS LEVEL
(10) Ultra Matt
COVERAGE
10-12 m²/litre
PACKAGE SIZE
4.95 litres.
(4½ litres and 0.45 litres)
DRYING TIME AT 20°C AND 50% RH
Touch dry/recoating:
Approx. 3 hours.
Ready for light traffic: 8 hours.
Fully cured after 3 days.
APPLICATION
Brush, short haired mohair roller, air/airless spray.
Oil
Rustic Oil
Priming and finishing oil for untreated wooden floors and table-/worktops. Rustic Oil Clear can be used in combination with Rustic Oil Colour
APPEARANCE
Clear – gives the wood a deep, warm glow.
COVERAGE
10-50 m²/litre depending on wood structure and absorption.
PACKAGE SIZE
¾, 2½, 5, 10, 25 and 200 litres.
DRYING TIME AT 20°C AND 50% RH
16-24 hours before applying the finishing coat.
Ready for use 24 hours after the finishing coat.
Fully cured after 3 days.
APPLICATION
Cloth, brush, roller, lambswool applicator or spray in combination with a nylon scouring pad for all types of surfaces.
Rustic Solid Oil 100
Priming and finishing oil for untreated/sanded wooden floors and table-/worktops. Very low content of VOC, only 15 g/l.
APPEARANCE
Gives the wood a deep, warm glow.
COVERAGE
Absorbing wood species: approx. 7.5 m² per litre. Less absorbing wood species: approx. 15 m² per litre.
PACKAGE SIZE
2½, 5 and 10 litres.
DRYING TIME AT 20°C AND 50% RH
Minimum 16 hours.
Ready for use 24 hours after the finishing treatment.
Fully cured after 3 days
APPLICATION
Shorthaired roller in a medium thick layer.
Professional Hardwax Oil
Priming and finishing Hardwax Oil for untreated/sanded wooden floors. Gives the floor a deep lustre and rich colour and is perfect for residential or commercial areas. Also ideal for use in locations where minimum closure time is important. Hardwax Oil cannot be overcoated with water-based lacquers.
APPEARANCE
Matt to Ultra matt.
COVERAGE
20-30 m²/litre.
PACKAGE SIZE
5 litres.
DRYING TIME AT 20°C AND 50% RH
Dry to touch at least 4 hours.
Recoating approx. 6 hours.
Buffing approx. 16 hours.
Fully cured after 6 days.
APPLICATION
Roller, brush or stainless steel spatula.
Cleaning & Maintenance
SylvaCleaner
SylvaCleaner is a universal cleaning product for daily or periodic cleaning of lacquered and oiled wood floors. SylvaCleaner has been developed to dissolve surface dirt and to dry quickly. SylvaCleaner does not leave a film or residue on the floor.
APPEARANCE
Colourless
PH-VALUE
Diluted: Approx. 6-8
Undiluted: Approx. 8.5
MIXING PROPORTIONS
50–200 ml per 10 litres of water.
PACKAGE SIZE
1, 2½ and 5 litres.
DRYING TIME AT 20°C AND 50% RH
Approx. 5 minutes.
APPLICATION
Well wrung out cloth or mop.
PUMPS
1 litres: ¼ pump
5 litres: 2 pumps
10 litres: 4 pumps
SylvaNeutralizer
Junckers SylvaNeutralizer is used for cleaning wood floor surfaces before maintaining with lacquer or oil. SylvaNeutralizer dries quickly and neutralises the surface after cleaning with SylvaCleaner. It is not necessary to clean the floor afterwards with water.
APPEARANCE
Colourless
PH-VALUE
Diluted: 3
Undiluted: 2
MIXING PROPORTIONS
200 ml per 10 litres of water.
PACKAGE SIZE
1 litre
DRYING TIME AT 20°C AND 50% RH
Approx. 5 minutes.
APPLICATION
Well wrung out cloth or mop.
PUMPS
1 litres: ¼ pump
5 litres: 2 pumps
10 litres: 4 pumps
Rustic TopOil
A surface maintainer for use on floors which have been treated with Junckers Rustic Oil. TopOil is easy to apply and fast drying so the floor is ready for use after 30 to 60 minutes. TopOil protectes the surface, restores a uniform sheen to the floor and reduces the effects of scratches and abrasions. Apply a coat of this oil, before starting to use a factory oiled Black Oak floor.
APPEARANCE
Dries to colourless ultra matt appearance.
GLOSS LEVEL
Ultra Matt
COVERAGE
30-50 m² per litre.
PACKAGE SIZE
Black: 2.5 litres.
Clear: 1, 2½ and 10 litres.
DRYING TIME AT 20°C AND 50% RH
Ready for light traffic after 30-60 minutes.
Fully cured after 24 hours
APPLICATION
Flat floor mop or cotton cloth.
